Question: Does A Soundbar Have To Be The Same Make As The TV?

How do I connect my soundbar to my TV without HDMI or arc?

If your TV does not have an HDMI ARC, HDMI or Optical output, you can connect the sound bar to the TV using the included 3.5mm analog AUX cable.

1 – Connect the included AUX cable between your TV’s audio output and the AUX input on the back of the sound bar.

2 – Select AUX on the sound bar remote control..

Can you hide a soundbar?

You can get a unique set of speakers that is much easier to hide, like wireless speakers or a soundbar. When it comes to cords, there are plenty of solutions too, although your best bet is a simple cord concealer.

How do I make my TV sound clearer?

To boost dialogue volume, try selecting speech-enhancing modes like News, Clear Voice or a setting along those lines. While you’re at it, turn off special “enhancements” like Dolby surround, virtual surround or 360 sound and see if that puts the dialogue further up front rather than the sound effects.

How do I sync my soundbar to my TV?

Soundbar is out of sync with the TVPress Sound Control on the soundbar remote, and then use the Left/Right buttons to adjust until sound is synced.Press Audio Sync on the soundbar remote, and then use the Skip Forward/Backward buttons to adjust until the sound is synced.Press + or – under Audio Sync to adjust until the sound is synced.

What do I do if my TV doesn’t have an HDMI ARC?

If you TV does not have ARC port then you will have to use optical, as normal HDMI port does not support both way data transfer for audio to go out of it. The optical and HDMI ports will both produce 5.1 audio. … The only difference with ARC is that it allows the soundbar to commuincate to the TV and back.

How close should a sound bar be to a TV?

The Distance Between the TV and Soundbar There should be a gap of between 10 and 15 cm (4 and 6 inches) between your TV and soundbar. The distance is ideal to allow easy access to connectivity and controls. Keep a minimum distance of 1 meter (3 feet) between the soundbar and the nearest sidewall.

Can you put a sound bar on the floor?

DO recognize audio speakers are most effective at ear-level. If you’re a stickler for sound, the floor is not the best place for them. If your speakers are small enough, consider placing them on a desk, shelf or console. DON’T ever put your speakers directly on the floor.

Can two TVs use one soundbar?

Yes, you can connect two separate soundbars together. … So the best option is to use the single soundbar to get the perfect audio result. The soundbar is the slim, modern speaker system which helps to experience the best quality audio sounds from your TV.

Where should I place my soundbar?

A soundbar is usually placed below a TV, but it’s also okay to mount it above a television set. Based on the model, the placement could determine the soundbar’s performance and how it looks. If the speakers are upward-firing, placing the soundbar above the TV will make a lot more acoustic sense.

Why is the sound bar not matching with TV?

There are a number of circumstances that can cause the audio and video to be out of sync. If watching a TV program, it could be the broadcast itself or a bad connection between your cable/satellite set-top box (if applicable). … There may even be a setting on the TV itself causing this issue.

How do I connect my soundbar to my HDMI TV?

To set up HDMI ARC, power on your TV and soundbar. Next, connect one end of an HDMI cable into the HDMI IN (ARC) port on your TV. Connect the other end into the HDMI OUT (TV-ARC) port on your soundbar. Next, change the source on your soundbar to the D.IN.

Is it OK to put soundbar behind TV?

Putting a soundbar behind the TV will interfere with reduce the sound quality by obstructing the sound waves. Soundbars are designed to be positioned just under your TV, and there shouldn’t be anything directly in front of the soundbar.

Can you hook up a soundbar to an older TV?

Older TVs, however, are only capable of receiving audio and video. So, if you’re going to use RCA cables when connecting a soundbar to a TV, you’ll have to split the signal before it reaches the TV to produce audio.

Is it better to connect Soundbar to TV or cable box?

The digital audio output is best if both your TV and sound bar support it, but the analog audio output will work nearly as well. … So if you’ve connected your cable box to HDMI 1 and selected that input, the TV will output the cable box’s audio from the TV’s audio output.