Should I Use 5w Or 10w Oil?

Can I use 5w instead of 10w?

Almost always the answer is going to be yes.

Both oils are exactly the same at operating temperature.

The 5W is “thinner”/less viscous than the 10W when its cold.

Unless your engine’s already on its way out switching to a 5W will improve starting in colder temperatures and help reduce engine wear at start up..

Is 10w40 good for high mileage?

The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well. As long as you’re not hearing knocking or serious mechanical noises from the engine, the heavier oil should buy you many more miles of service from your vehicle.

What is the thickest engine oil?

The thickest viscosity grade for automotive applications is a SAE 60 which has a viscosity between 21.9 and 26 cst at 100c. Pretty thick stuff. Used in older engines, large Diesel engines. Racing grades include 20w50s for older, air cooled engines.

Which oil is heavier 5w or 10w?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Will thicker oil damage my engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

Will 10w 30 oil hurt a 5w30 engine?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

Will the wrong oil damage my engine?

Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so. Contrary to what some believe, adding synthetic oil to regular oil won’t harm the engine, but there’s also no benefit in doing so.

Do oil brands matter?

No. Switching brands is not harmful to your engine as long as you choose an oil marked with the API donut of the same level, e.g., API SN. Motor oil manufacturers must meet minimum industry standards for performance and compatibility of the API mark.

What happens if you put 10w oil in 5w?

Your oil is a little thicker when cold. No damage will happen. … The 5W and 10W defines how the oil will flow at 0 degrees. At operating temperature, there will be a completely insignificant difference between the two.

Which oil is better 5w30 or 10w30?

5w30 is a great multigrade oil for use in low starting temperatures as well as high summer temperatures. It is also more fuel efficient since it creates less drag on the bearings and moving engine parts. 10w30 is thicker and may provide better sealing capability for older engines.

What happens if you put 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Is Thicker oil better for high mileage cars?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

Can you mix 5w30 and 10w40 oil?

As posted above, mixing 5w30 with 10w40 will give you an oil that performs somewhat better in the cold than 10w40, but less good cold than 5w30, and that has a viscosity a bit higher than 5w30 but a bit lower than 10w40. … Mixing different oils will not improve the performance or efficiency of the engine in any way.

Is 10w30 better for high mileage?

Both high mileage 5w30 and 10w30 engine oils have the same additives, the only difference is the viscosity at cold startups. Since both oils have the same operating temperature viscosity (30) and additives, they will perform exactly the same. However, 5w30 flows much better than 10w30 during cold starts.

When should I use 5w30 oil?

The lower viscosity of 5W30 will be perfect for use in cold weather as the oil is thin enough to get into different parts of the engine even in cold weather and to ensure easy startups. The thinner nature of this oil will ensure your vehicle maintains optimal performance in winter.